HE4000
HE4000-SD ONLY 4:2:0:15Mbps Low cost version Standard Definition 4:2:0. Video Encode Bit rate limited to 15 Mbps MP@ML. Unit can be used to encode four AES/EBU digital stereo pairs via BNC and Balanced Audio audio via DB-9 and one SMPTE 259 SD Video source. Unit comes with SD input interfaces as well as ASI and SMPTE310M outputs. Unit is upgradeable to ful feature High Definition (HD) encoder as well as all full feature options. (Price $ 21.000)
HE4000-BASE-S
HE4000-SD
Низкоценовая версия. Стандартное разрешение (SD) 4:2:0. Поток сжатия видео ограничен до 15 Mbps. Устройство может быть применено для кодирования четырех цифровых видеопар через BNC, а также аудиосигнала через DB-9 и одного видеоисточника SMTPE 259 SD. Устройство комплектуется двумя входными интерфейсами SD и выходами типа ASI и SMTPE310M. Легко модернизируется до полнофункциональной версии высокого разрешения (HD) путем установки программного обеспечения. (Цена $21.000)
HE4000-SD OPTIONS: All options to be taken directly from the SE4000 options list and price breaks. Note: Any options purchased for the HE4000-SD will ONLY work in SD mode. If unit is upgraded to HD the HD options must be purchased seperately.
(Price $ 21.000)
HE4000-SD Устройство обладает всеми возможностями SE-4000, описанными в соответствующей документации. Примечание: Все опции, оплаченные при покупке HE4000-SD, доступны ТОЛЬКО в режиме стандартного разрешения (SD). При модернизации, для режима высокого разрешения (HD), дополнительные функции оплачиваются отдельно.
(Цена $ 21.000)
HE4000-SD to HD UPGRADE: Upgrade of HE4000-SD to standard HE4000-BASE-HD. This upgrade will ADD HD capability while retaining all SD capability and all SD options. This upgrade must be done in the factory or a Tiernan authorized service center.
HE4000-OPTN-SD2HD (Price $23.000)
Устройство HE4000-SD, усовершенствованное до режима высокого разрешения (HD).
Обладает всеми функциями модели HE4000-BASE-HD. Модернизация добавляет возможности режима HD, сохраняя при этом все функции SD режима. Работы по апгрейду производятся только на производстве или в официальных сервисных центрах компании Tiernan.
HE4000-OPTN-SD2HD (Цена $23.000)
HE4000 4:2:0: High Definition 4:2:0 ++PLUS++ Standard Definition 4:2:0 encoder. Two encoders in-one chassis. Video Encode Bit rate runs to 80 Mbps MP@HL. Unit can encode four AES/EBU digital stereo pairs via embedded, AES and Analog Audio audio. MPEG I-II or AC-3 2.0 encoding with AC-3 5.1, linear PCM or Dolby E passthrough. Unit comes with HD SMPTE 292 and SD SMPTE 259 video input interfaces as well as two ASI and one SMPTE310M output. Remote controll via RS232, Ethernet SNMP and embedded Web browser. Conditiona access via PGCA or optional BISS scrambling.
HE4000-BASE-HD $40,000
HE4000 4:2:0: High Definition 4:2:0 ++PLUS++ Standard Definition 4:2:0 encoder.
Два кодирующих устройства, объединенные в одном корпусе. Поток кодирования видеосигнала до 80 Mbps. Устройство может кодировать четыре цифровых стереопары типа AES/EBU, с помощью встроенных AES и Analog Audio. Форматы MPEG 1-2 и AC-3.2.0 кодируются в AC-3.5.1 через линейный PCM или DolbyE. Поставляется с входными видеоинтерфейсами SMTPE 292 и SD SMTPE 259, а также с двумя выходами ASI и SMTPE310M. Дистанционное управление возможно через RS 232, Ethernet SNMP и встроенный веб-браузер. Условия доступа через PGCA или поставляемый отдельно BISS-скремблер.
HE4000-ASI ReMUX - Adds remultiplexing functionality to HE4000 HD or SD units. Enables the ASI input to be used for "daisy chain" remultiplexing similar to TE6000A functionality. Maximum input and output transport rate with this function is 108 mbps. Note: May not be available on some early HE4000 units - check with the factory before quoting this as a field upgrade.
HE4000-ReMUX (Price $1)
HE4000-ASI ReMUX - добавляет функции ремультиплексора устройствам HE4000 HD и SD. Оборудован входом ASI для создания ремультиплесного универсального подключения, подобного к реализованному в устройстве TE6000A . Максимальная входная и выходная скорость передачи данных на этой функции - 108 mbps. Может быть не совместим с ранними версиям устройств HE4000. Перед подключением проверьте завод-производитель и апгрейды.
HE4000 4:2:2 SD upgrade: Upgrade to 4:2:2 in SD. Provides encoding for both 4:2:0 and 4:2:2 MPEG-2, 4:2:0 Main Profile @ Main Level: 1 to 15Mbps MPEG-2, 4:2:2 Main Profile @ Main Level: 2.5 to 50Mbps (Price $2.500)
HE4000-INST-422S
HE4000 4:2:2 SD upgrade: Усовершенствованная версия для работы в режиме стандартного разрешения 4:2:2. Обеспечивает кодирование сигнала MPEG-2 в разрешении 4:2:0 (поток сжатия от 1 до 15 Mbps) и 4:2:2 (поток сжатия от 2.5 до 50Mbps).
Цена $2.500.
HE4000 4:2:2 SD & HD upgrade:
HE4000 4:2:2 SD & HD upgrade: Увеличивает разрешение до 4:2:2, HD и SD если SD опция уже установлена. Устройство кодирует сигнал в виде HD SMPTE 292, 120Mbps в 422P@ML и SD SMPTE 259 в MP@ML в режиме 250 Mbps с обще скоростью передачи данных 155 Mbps (Цена $5.000)
HE4000SD to AVC4000SD Conversion: Addition of AVC MPEG4 Encoding to HE4000SD. This upgrade converts the unit from HE4000SD to AVC4000SD.
HE4000SD-UPG-AVC4000SD (Price $12,000)
HE4000SD to AVC4000SD Conversion: Дополнение к AVC MPEG4 Encoding to HE4000SD. Это усовершенствование устройства HE4000SD до AVC4000SD.
HE4000SD-UPG-AVC4000SD (Цена $12,000)
HE4000SD to AVC4000HD Conversion: Addition of AVC MPEG4 HD Encoding to HE4000SD. This upgrade converts the unit from HE4000SD to AVC4000HD.
HE4000SD-UPG-AVC4000HD (Price: CALL)
HE4000SD to AVC4000HD Conversion: Дополнение к AVC MPEG4 HD Encoding to HE4000SD. Это усовершенствование устройства HE4000SD до AVC4000НD.
HE4000SD-UPG-AVC4000НD (Цена договорная)
HE1000
HE1000-HD News encoder- High Value - High Definition MPEG-2 encoder suitable for news gathering applications. Video Encode in 4:2:0 only. Video input via HD-SDI Unit can be used to encode two AES/EBU digita stereo pairs via BNC or embedded HDSDI. One of the audio input pairs may be analog. Output interface is ASI. Unit is upgradeable to add 4:2:2 video encoding. Unit is not upgradeable to add additional output interface. Unit can not be configured with a Satellite modulator (Price $25.000)
HE1000-HD News encoder - высокостоимостный High Definition MPEG-2 энкодер, разработанный для сборки новостийных приложений. Кодирование видеосигнала только в разрешении 4:2:2. Устройство не может быть оборудовано дополнительным выходным интерфейсом и не конфигурируется со спутниковым модулятором (Цена $25.000).
HE1000 DC Power Option: Replaces the standard 100 240VAC power supply with a -48 VDC power supply. (Price $750)
HE1000 DC Power Option: заменяет стандартный источник питания 100 - 240В, переменного тока на 48В постоянного тока. (Цена $750) .
HE1000-HD ATSC Encoder- High Value - High Definition MPEG-2 encoder suitable for ATSC applications. Video Encode in 4:2:0 only. Video input via HD-SDI Unit can be used to encode two AES/EBU digita stereo pairs as AC3 2.0 or AC3 pass-through via BNC or embedded HDSDI. One of the audio input pairs may be analog. Output interface is ASI. Unit is upgradeable to add 4:2:2 video encoding. Unit is not upgradeable toadd additional output interface. Unit can not be configured wit a Satellite modulator. Unit supports ATSC CC via HDSDI or SMPTE-333 Server port. Unit supports insertion of externally generated PSIP tables via ASI. Unit provides static PSIP tables if required. $27,500
SE 4000
SE4000 MPEG-2 4:2:0 MP@ML encoding 1 to 15Mbps. Optional 4:2:2 P@ML encoding is field upgradeable. Composite PAL/NTSC input and SDI video inputs. Two analog stereo and two AES/EBU digital stereo audio inputs available. MPEG-1 layer II, AC3 2.0 2ch encoding Encoding, AC3 5.1 pass-through Remote control via RS232,10/100 Base-T Ethernet on RJ45 connector and twouser data channels. Transport stream with two ASI outputs. Conditional access via. PGCA or optional BISS scrambling.
(Price $16.000)
SE4000-BASE
SE4000-ENC422 4:2:2 Option: Provides encoding for both 4:2:0 and 4:2:2 MPEG-2,4:2:0 Main Profile @ Main Level: 1 to 15Mbps MPEG-2,4:2:2 Main Profile @ Main Level: 2.5 to 50Mbps (Price $2.500)
SE4000-INST-422
AVC4000SD
AVC4000SD: Tiernan's Advanced Video Coding (MPEG-4) AVC4000-SD Encoder features the latest advancements in video encoding, conrforming to the H.264/AVC specification. Optionally equipped with a DVB-S or DVB-S2 Modulator, this encoder offers the optimal solution for SD video compression and satellite bandwidth usage. Upgrade to simulcast of MPEG-2 and AVC encoded video streams to operate in evolving delivery networks. Audio encoding of two audio pairs is included in the base unit with two additional audio pairs possible via software upgrade. (Price $26.000)
AVC4000SD-BASE
AVC4000HD: 4:2:0: High Definition AVC ++PLUS++ Standard Definition (MPEG2 only) 4:2:0 or 4:2:2 encoder. Two encoders in-one chassis. AVC MPEG4 Video Encode Bit rate runs to 20 Mbps AVC MP@L4. Unit can encode four AES/EBU digital stereo pairs via BNC, embedded and Analog Audio audio via DB-9. MPEG1 LII or AC-3 2.0 encoding with AC-3 5.1, linear PCM or Dolby E passthrough. Unit comes with analog video and two SD SMPTE 259 SD video input interfaces as well as HD SMPTE-292M HD-SDI and two ASI and one SMPTE310M output. Remote controll via RS232, Ethernet and embedded Web browser. Conditional access via PGCA or optional BISS scrambling. (Price$ 70.000)
AVC4000HD-BASE
AVC4000SD-MPEG2-Upgrade: Addition of MPEG2 encoding to AVC4000SD to allow for simultaneous or selected encoding in MPEG4 and/or MPEG2 of same video source.Add to base Unit. (Price $ 1.715)
AVC4000SD-INST-MPEG2 AVC4000-ASI ReMUX -Adds remultiplexing functionality to AVC4000 HD or SD units. Enables the ASI input to be used for "daisy chain" remultiplexing similar to TE6000A functionality. Maximum input and output transport rate with this function is 108 mbps. Note: Check with the factory before quoting this as a field upgrade. (Price $ 1.900 )
AVC4000-ReMUX
AVC4000-Quad Stereo-Option: Addition of two stereo (or 4 mono) audio outputs for a total of 4-stereo or 8 mono audio outputs.
AVC4000-INST-DUALST (Price $ 1.285)
4000-BISS BISS Option: Basic Interoperable Scrambling System conditional access available in modes 0,1 and E 4000-INST-BISS (Price $1.850)
4000-T3/E3 Interface Interface option: G.703 BNC Unbalanced Interface Module. Direct output at T3, DS3 (Framed T3), or E3 selectable.
4000-INST-T3/E3 (Price $2.000)
4000-MOD100 QPSK Mod Option: Integrates a built in QPSK modulator with an IF output of 52-88MHz and 104-176MHz via 75ohm BNC variable symbol rate 1-45Msps, Variable data rate 1-78Mbps (Price $ 3.800)
4000-INST-MOD100
4000-MOD200 QPSK & 8PSK Mod Option: Built in modulator to operate at QPSK and 8PSK modulation variable symbol rate 1-45Msps, Variable data rate 1-110Mbps.
4000-INST-MOD200 (Price $5.000)
4000-MOD400 QPSK & 8PSK & 16QAM Mod Option. Built in modulator to operate at QPSK, 8PSK and 16QAM modulation variable symbol rate 1-45Msps, Variable data rate 1-110Mbps. 4000-INST-MOD400 (Price $6.100)
4000-LBAND L-Band Output: To be used with built in modulator option. Replaces 70/140MHz IF with a 950-2050MHz output. Includes L-Band monitor output that can be connected to IRD. Note: Does not include high stability 10MHz reference. Note: Price adderto4000-MOD100, MOD200, MOD400.(Price $ 700)
4000-INST-LBAND
4000-LBAND-HS L-Band Output: To be used with built in modulator option. Replaces 70/140MHz IF with a 950-2050MHz output. Includes L-Band monitor output that can be connected to IRD. Includes high stability 10MHz reference output on TX connector. Note: Price adder to 4000-MOD100, MOD200, MOD400.(Price $ 1.100)
4000-INST-LXBAND
4000-70/140 & L-BAND L-Band/70/140 Output: Use with built in modulator option. Provides both 70/140MHz IF and 950-2050MHz output. Includes L-Band monitor output that can be connected to IRD (Price $ 1.200)
4000-INST-LBAND/70/140
4000-DVBS2 Option: Adds DVB-S2 (CCM Mode) capability for optimal performance. Max symbol rate 45 Msps. FEC 2/3, 3/4,5/6, 8/9,9/10. Provides all supported DVB-S2 modulations QPSK,8PSK,16APSK (16APSK provided as a free software upgrade when available). This option must be added to MOD200 or MOD400. Users with MOD100 must upgrade to MOD200 plus the DVB-S2 upgrade.(Price $ 1.700)
4000-S2
Encoder IP Interface- provides for IP output on 100/1000 BASE-T full duplex Ethernet interface. Supports UDP and Pro MPEG forum COP3 RTP (with no FEC). Supports Unicast or Multicast transmission.
4000-IP-UDP / RTP Encoder IP Interface COP3 FEC Option - Adds Pro MPEG Forum COP3 FEC to standard encoder IP interface. Initial release supports column FEC only. Sold as software licensed variant code. (can be field upgrade.)
4000-IP COP3 FEC ( Price $1500)
4000-DC power options: Provides for DC power input to any of the 4000 series encoders. Power supplies are available in three power input ranges, 9 -18VDC, 18 - 36 VDC, and 36 - 72 VDC. Pricing and delivery lead time vary by power supply variety and product. (Price: CALL)
4000-DC
Interface Converters (TUI10)
TUI10: Universal Interface Converter converts between DVB-ASI, RS422, DVB SPI, G.703, DS3, SMPTE-310M into one user selectable output. TUI10-BASE $4,100
Redundancy Switches
TRS1: 1:1 Encoder redundancy protection switch Provides automatic switchover when a fault is detected from the primary encoder to cause a switchover. BNC inputs and outputs. (Price $3.375)
TRS1-BASE
TRS2/E: 1 :N Encoder redundancy protection switch Provides automatic switchover when a fault is detected from the primary encoder to cause a switchover. Both SCPC and MCPC operation switching video, audio and data.(Price $3.975)
TRS2-BASE
Network Management
TNMS: Monitor and Control (M&C) sytem to command and control any Tiernan encoder or IRD (Price: CALL)
TNMS-BASE
Interface Converters (TATM8)
TATM8: ATM Network Adapter and Multiplexer/Demultiplexer Provides a simple and efficient method of transmitting multiple MPEG-2 transport streams over ATM networks. 2 Channel (Price $9.950)
TATM8-BASE-2
TATM8: ATM Network Adapter and Multiplexer/Demultiplexer Provides a simple and efficient method of transmitting multiple MPEG-2 transport streams over ATM networks. 4 Channel (Price $12.950)
TATM8-BASE-4
TATM8: ATM Network Adapter and Multiplexer/Demultiplexer Provides a simple and efficient method of transmitting multiple MPEG-2 transport streams over ATM networks. 6 Channel (Price $15.950)
TATM8-BASE-6
TATM8: ATM Network Adapter and Multiplexer/Demultiplexer Provides a simple and efficient method of transmitting multiple MPEG-2 transport streams over ATM networks. 8 Channel (Price $18.950)
TATM8-BASE-8
TATM8 Upgrades
TATM8 2-4 Upgrade: Upgrade from 2 channel to 4 channel TATM8-SPAR-2/4 (Price $6.500)
TATM8 2-6 Upgrade: Upgrade from 2 channel to 6 channel TATM8-SPAR-2/6 (Price $6.500)
TATM8 2-8 Upgrade: Upgrade from 2 channel to 8 channel TATM8-SPAR-2/8 (Price $9,500)
TATM8 4-6 Upgrade: Upgrade from 4 channel to 6 channel TATM8-SPAR-4/6 (Price $3,500)
TATM8 4-8 Upgrade: Upgrade from 4 channel to 8 channel TATM8-SPAR-4/8 (Price $6,500)
TATM8 6-8 Upgrade: Upgrade from 6 channel to 8 channel TATM8-SPAR-6/8 (Price $3,500)
HD4040
HD4040 Base Unit Includes High definition and/or standard definition simultaneous decoding. HD4040 can decode MPEG-II 4:2:0 or 4:2:2. All of the TDR4022 features are included plus 2 additional decoded audio pairs and HD Video Decoding. Note: If analog audio is required you must purchase the optional analog audio cable kit.
HD4040-BASE ( Price $10,530)
HD4040 Options
HD4040-DVBS2: Provides for reception of either DVB-S or DVB-S2 carriers. Modulation types QPSK, 8PSK 2-45Msps in DVB-S and QPSK, 8PSK 10-30 Msps in DVB-S2
HD4040-S2-rev 01(Price $2,400)
HD4040-DVBS2: Provides for reception of either DVB-S or DVB-S2 carriers. Modulation types QPSK, 8PSK 2-45Msps in DVB-S and QPSK, 8PSK and 16APSK 1-45 Msps in DVB-S2.
HD4040-S2 rev 2 (Price $2,700)
HD4040-G.703: Provides for a DS3 or E3 Terrestrial Input.
HD4040-G.703 (Price $9000)
HD4040 - IP - UDP / RTP: Decoder IP Interface -Provides for IP input on 100/1000 BASE-T full duplex Ethernet interface. Supports UDP and Pro MPEG forum COP3 RTP (with no FEC). Supports Unicast or Multicast reception. Supports IGMP and Redundancy.
HD4040 - UDP / RTP (Price $1116)
Decoder IP Interface COP3 FEC Option - Adds Pro MPEG Forum COP3 FEC to standard decoder IP interface. Supports row & column FEC. Sold as software licensed variant code. (can be field upgrade.) HD4040 - UDP / RTP (Price $500)
HD4040-analog audio cable kit. This kit provides the cabling necessary to provide XLR analog audio connections. Kit includes 4 cables. HD4040-XLRKIT (Price $200)
HD4040-DC power options: Provides for DC power input. Power supplies are available in three power input ranges, 9 - 18VDC, 18-36 VDC, and 36 - 72 VDC. Pricing and delivery lead time vary by power supply variety. HD4040-DC (Price $350)
4:2:2: HDTV Modular Professional Decoder with integrated color monitor. Professional TV network applications MPEG-2,4:2:0 & 4:2:2 Main Profile @ High Level (up to 80 Mbps) Two serial digital video outputs per SMPTE 292M SDI @ 1.4Gbps One AES/EBU digital stereo pair output via BNC connectors. Unit includes TMAC-6125 M&C card with 232 / Ethernet control as well as TDEC6422. NOTE: Cannot have a demod in the decoder with HD&SD configurtation.
HD4000-BASE-HD/SD (Price $9,500)
HD4000-HD: HD Decoder (Selectable) 4:2:0 & 4:2:2:HDTV Modular Professional Decoder with integrated color monitor and optional Integrated demodulator. Professional TV network applications MPEG-2,4:2:0 & 4:2:2 Main Profile @ High Level (up to 80 Mbps) Two serial digital video outputs per SMPTE 292M SDI @ 1.4Gbps One AES/EBU digital stereo pair output via BNC connectors. Unit includes TMAC-6125 M&C card with 232 / Ethernet control as well as TDEC6422.
HD4000-BASE-HD (Price $8,500)
HD4000-SD: SD Decoder 4:2:0 & 4:2:2: SDTV Modular Professional Network Decoder for professional TV network applications. Comes with integrated color monitor. Optional Integrated demodulator available. MPEG-2,4:2:0 Main Profile @ Main Level: 1 to 15Mbps MPEG-2,4:2:2 Main Profile @ Main Level: 2.5 to 50Mbps Composite analog video output via BNC (F) connector and serial digital component video (SMPTE 259M) BNC (F) connector. Unit includes TMAC-6125 M&C card with 232 / Ethernet control as well as TDEC-6100 4:2:0 & 4:2:2 decoder card.
HD4000-BASE-SD (Price $4,495)
HD4000-SD/HD Upgrade: Upgrade from HD4000-SD only to HD4000-HD/SD. Upgrade includes factory install of TDEC6422. Note: Decoder cannot have a demod in this configuration.
HD4000-UPGD-HD/SD ( Price $7,926)
TDEM-6200: DVB-S and DVB-S2 demod with QPSK/8PSK L-Band Input (950-2050).
TDEM6200-BASE ( Price $4,715)
TAUD-6100: Four additional AES/EBU audio output output channels (BNC) Supporting Dolby pass through
TAUD-6100-BASE (Price $1,650)
TDR6HD 4:2:0: HDTV Modular Professional Network IRD Integrated receiver/decoder for professional TV network applications MPEG-2,4:2:0 Main Profile @ High Level (up to 70 Mbps) Two serial digital video outputs per SMPTE 292M SDI @ 1.4Gbps One AES/EBU digital stereo pair output via BNC connectors. Unit includes TMAC-6125 M&C card with 232 / Ethernet control as well as TDEC6161 HDTV 4:2:0 SDI decoder card and TAUD6100 for 4 stereo AES digital audio channels with Dolby pass through (BNC)
TDR6HD-BASE-420 ( Price $8,800)
TDR6HD 4:2:2: HDTV Modular Professional Network IRD Integrated receiver/decoder for professional TV network applications MPEG-2,4:2:0 & 4:2:2 Main Profile @ High Level (up to 80Mbps). Supports 1080i and 720p formats. Format conversion 1080i to 720p, and 720p to 1080i in 4:2:0 mode only. Two serial digital video outputs per SMPTE 292M SDI @ 1.4Gbps One AES/EBU digital stereo pair output via BNC connectors. Unit includes TMAC-6125 M&C card with 232 / Ethernet control with Dolby pass through (BNC)
TDR6HD-BASE-422 (Price $9,000)
TDR6HD 4:2:2 - Upgrade **On Site**: On Site installation kit includes the TDEC6422 4:2:0 & 4:2:2 HD decoder. Card includes built in audio decode for MPEG & AC3 2.0, pass through for Dolby E & AC3 5.1. Built in AC3 5.1 to 2.0 Downmix. Card has HD SDI & Analog HD video out. Dual SMPTE292M outputs, RGBHV output, YPrPb Outputs, Composite Video NTSC and PAL outputs at 1080i or 720P. Card supports (CC) EIA-708 and MPEG-2 4:2:2 profile @ High Level up to 80Mbps. Upgrade also comes with new TMAC firmware as well as instructions for upgrade. NOTE: Standard Warranty applies only to supplied HW and FW.
TDR6HD-SPAR-422SITE ( Price $4,500)
TDR6HD 4:2:2 - Upgrade **Factory**: Factory installation includes the TDEC6422 4:2:0 & 4:2:2 HD decoder. Card includes built in audio decode for MPEG & AC3 2.0, pass through for Dolby E & AC3 5.1. Built in AC3 5.1 to 2.0 Downmix. Card has HD SDI & Analog HD video out. Dual SMPTE292M outputs, RGBHV output, YPrPb Outputs, Composite Video NTSC and PAL outputs at 1080i or 720P. Card supports (CC) EIA-708 and MPEG-2 4:2:2 profile @ High Level up to 80Mbps. Factory update of all firmware on all boards to the latest possible revision. NOTE: Full factory re-test of unit is performed and full warranty on TDR6 is re-established from date of shipment of upgraded unit.
TDR6HD-SPAR-422FACTORY ( Price $5,500)
TDEM-6200: DVB-S and DVB-S2 demod with QPSK/8PSK L-Band Input (950-2050).
TDEM6200-BASE (Price $4,715)
TAUD-6100: Four additional AES/EBU audio output output channels (BNC) Supporting Dolby pass through
TAUD-6100-BASE ( Price $1,650)
TDR4022: TDR4022 Base Unit Includes Standard definition 4:2:0 or 4:2:2 video decoding, Analog and digital video outputs, 2 pairs of audio decoding with analog, digital or embedded outputs, an ASI and integrated QPSK satellite receiver with a 4-port L-band input switch. This unit includes PGCA and BISS decryption. Note if analog audio is required must purchase analog audio cable kit.
TDR4022-BASE (Price $2,825)
Encoder IP Interface - Adds Pro MPEG Forum COP3 FEC to standard decoder IP interface. Supports row & column FEC. Sold as software licensed variant code. (can be field upgrade.) (Price $600)
TUI10: Universal Interface Converter converts between DVB-ASI, RS422, DVB SPI, G.703, DS3, SMPTE-310M into one user selectable output. TUI10-BASE (Price $4.100) - Provides for IP output on 100/1000 BASE-T full duplex Ethernet interface. Supports UDP and Pro MPEG forum COP3 RTP (with no FEC). Supports Unicast or Multicast transmission.
4000-IP-UDP / RTP Encoder IP Interface COP3 FEC Option - Adds Pro MPEG Forum COP3 FEC to standard encoder IP interface. Initial release supports column FEC only. Sold as software licensed variant code. (can be field upgrade.) (Price $ 1.700)
TDR6HD 4:2:0: HDTV Modular Professional Network IRD Integrated receiver/decoder for professional TV network applications MPEG-2,4:2:0 Main Profile @ High Level (up to 70 Mbps) Two serial digital video outputs per SMPTE 292M SDI @ 1.4Gbps One AES/EBU digital stereo pair output via BNC connectors. Unit includes TMAC-6125 M&C card with 232 / Ethernet control as well as TDEC6161 HDTV 4:2:0 SDI decoder card and TAUD6100 for 4 stereo AES digital audio channels with Dolby pass through (BNC)
TDR6HD-BASE-420 (Price $8,800)
TDR6HD 4:2:2: HDTV Modular Professional Network IRD Integrated receiver/decoder for professional TV network applications MPEG-2,4:2:0 & 4:2:2 Main Profile @ High Level (up to 80Mbps). Supports 1080i and 720p formats. Format conversion 1080i to 720p, and 720p to 1080i in 4:2:0 mode only. Two serial digital video outputs per SMPTE 292M SDI @ 1.4Gbps One AES/EBU digital stereo pair output via BNC connectors. Unit includes TMAC-6125 M&C card with 232 / Ethernet control with Dolby pass through (BNC)
TDR6HD-BASE-422 (Price $9,000)
DR6HD 4:2:2 - Upgrade **On Site**: On Site installation kit includes the TDEC6422 4:2:0 & 4:2:2 HD decoder. Card includes built in audio decode for MPEG & AC3 2.0, pass through for Dolby E & AC3 5.1. Built in AC3 5.1 to 2.0 Downmix. Card has HD SDI & Analog HD video out. Dual SMPTE292M outputs, RGBHV output, YPrPb Outputs, Composite Video NTSC and PAL outputs at 1080i or 720P. Card supports (CC) EIA-708 and MPEG-2 4:2:2 profile @ High Level up to 80Mbps. Upgrade also comes with new TMAC firmware as well as instructions for upgrade. NOTE: Standard Warranty applies only to supplied HW and FW.
TDR6HD-SPAR-422SITE (Price $4,500)
TTDR6HD 4:2:2 - Upgrade **Factory**: Factory installation includes the TDEC6422 4:2:0 & 4:2:2 HD decoder. Card includes built in audio decode for MPEG & AC3 2.0, pass through for Dolby E & AC3 5.1. Built in AC3 5.1 to 2.0 Downmix. Card has HD SDI & Analog HD video out. Dual SMPTE292M outputs, RGBHV output, YPrPb Outputs, Composite Video NTSC and PAL outputs at 1080i or 720P. Card supports (CC) EIA-708 and MPEG-2 4:2:2 profile @ High Level up to 80Mbps. Factory update of all firmware on all boards to the latest possible revision. NOTE: Full factory re-test of unit is performed and full warranty on TDR6 is re-established from date of shipment of upgraded unit.
TDR6HD-SPAR-422FACTORY ( Price $5,500)
TDEM-6200: DVB-S and DVB-S2 demod with QPSK/8PSK L-Band Input (950-2050).
TDEM6200-BASE (Price $4,715)
TAUD-6100: Four additional AES/EBU audio output output channels (BNC) Supporting Dolby pass through
TAUD-6100-BASE ( Price $1,650)
TDR4022: TDR4022 Base Unit Includes Standard definition 4:2:0 or 4:2:2 video decoding, Analog and digital video outputs, 2 pairs of audio decoding with analog, digital or embedded outputs, an ASI and integrated QPSK satellite receiver with a 4-port L-band input switch. This unit includes PGCA and BISS decryption. Note if analog audio is required must purchase analog audio cable kit.
TDR4022-BASE ( Price $2,825)
TDR4022 Options
TDR4022-DVBS2: Provides for reception of either DVB-S or DVB-S2 carriers. Modulation types QPSK, 8PSK 2-45Msps in DVB-S and 10-30Msps in DVB-S2
TDR4022-S2-rev 01 ( Price $2,572)
HD4040-DVBS2: Provides for reception of either DVB-S or DVB-S2 carriers. Modulation types QPSK, 8PSK 2-45Msps in DVB-S and QPSK, 8PSK and 16APSK 1-45 Msps in DVB-S2.
HD4040-S2 rev 2 (Price $2,700)
TDR4022-G.703: Provides for reception of DS3 or E3 as generated by TUI-10, SE4000 or HE4000. Supports 188 byte packet mode and all Tiernan standard DS3 framing formats. TDR4022-G.703 (Price $900)
TDR4022-Genlock: Provides for frame synchronous gunlock to an externally provided black burst input.
TDR4022-Genlock $1,600
TDR4022-IP - Use HD4040 pricing
TDR4022-DC power options: Provides for DC power input. Power supplies are available in three power input ranges, 9 - 18VDC, 18-36 VDC, and 36 - 72 VDC. Pricing and delivery lead time vary by power supply variety. TDR4022-DC (Price $350)
TDR4022-analog audio cable kit. This kit provides the cabling necessary to provide XLR analog audio connections. Kit includes 2 cables. TDR4022-XLRKIT(Price $100)
TDR4400 - HD - ASI - TDR4400 chassis and decode -provides for MPEG-2 and MPEG-4 decoding. Will decode either HD feeds from an ASI source.
TDR4400-HD-ASI (Price $4,237)
TDR4400 - HD - RF - TDR4400 chassis and decode -provides for MPEG-2 and MPEG-4 decoding. Will decode HD feeds from an RF DVB-S QPSK or DVB-S2 QPSK or 8PSK source.
TDR4400-HD-RF Note: Does not provide LNB voltage. (Price $3,957)
TDR4400 - HD - IP - TDR4400 chassis and decode -provides for MPEG-2 and MPEG-4 decoding. Will decode HD feeds from an Ethernet IP source. Includes support for COP3 FEC.
TDR4400-HD-IP (Price $6,267)
TDR4400 - HD - ASI - RF - TDR4400 chassis and decode - provides for MPEG-2 and MPEG-4 decoding. Will decode HD feeds from an ASI or RF DVB-S QPSK or DVB-S2 QPSK or 8PSK source.
TDR4400-HD-ASI - RF Note: Does not provide LNB voltage. (Price $4,672)
TDR4400 - HD - ASI - IP - TDR4400 chassis and decode - provides for MPEG-2 and MPEG-4 decoding. Will decode HD feeds from an ASO or Ethernet IP source. Includes support for COP3 FEC.
TDR4400 - HD - ASI - IP (Price $6,982)
TDR4400 - HD - RF - IP - TDR4400 chassis and decode - provides for MPEG-2 and MPEG-4 decoding. Will decode HD feeds from an ASI or RF DVB-S QPSK or DVB-S2 QPSK or 8PSK source.
TDR4400 - HD - RF - IP (Price $6,700)
Upgrade to 4:2:2 HD and SD if SD upgrade option is installed. Unit will encode up to HD SMPTE 292 120Mbps in 422P@ML and SD SMPTE 259 MP@ML 2.5-50 Mbps mode with a total Transport Stream of 155Mbps.(Price $5.000)
HE4000-INST-422H